amorphous choke coil ? general specification *1 the inductance at current 0 [a] indicates the reference value. *2 the number of turns indicates the reference value. the specification of the inductance takes precedence over that of the num ber of turns. 19.0 am05751jrh 20 310 250 20 72.5 37t 39.0 28.3 am20251jlh 15 550 450 35 72.0 49t 40.0 21.2 am15451jlh 12 860 700 53 72.5 61t 39.0 17.0 am12701jlh 15 380 300 26 55.5 41t 38.0 21.2 am15301jkh 12 590 450 41 55.5 51t 38.0 17.0 am12451jkh 10 840 650 53 56.0 61t 38.0 14.1 am10651jkh 12 420 350 33 55.0 47t 32.0 17.0 am12351jch 10 600 500 45 54.5 56t 32.5 14.1 am10501jch 8 1000 800 73 56.0 72t 33.5 11.3 am08801jch 8 600 500 53 46.5 59t 32.0 11.3 am08501jbh 6 970 800 94 45.0 75t 30.5 8.5 am06801jbh 5 1500 1200 140 45.5 92t 31.5 7.1 am05122jbh 6 740 650 87 41.0 69t 32.5 8.5 AM06651JAH 5 1000 900 115 40.5 81t 32.0 7.1 am05901jah 5 890 750 110 40.5 85t 27.0 7.1 am04102jrh 4 1200 1000 160 40.5 100t 26.5 5.7 am04801j8h 4 1100 800 150 32.5 84t 25.5 5.7 am03152j8h 3 2000 1500 230 34.0 11 6t 26.0 4.2 am03901j7h 3 1100 900 140 33.0 102t 19.5 4.2 am02202j7h 2 2400 2000 350 33.0 155t 2.8 1.1 b 4p - 1.1 b 3p - 1.2 b 2p - 1.1 b 3p - 1.2 b 2p - 1.1 b 2p - 1.2 b 2p - 1.1 b 2p - 1.0 b 2p - 1.0 b 2p - 1.2 b 1p - 1.1 b 1p - 1.2 b 1p - 1.1 b 1p - 1.1 b 1p - 1.0 b 1p - 0.9 b 1p - 0.85 b 1p - 0.9 b 1p - 0.7 b 1p - am05 5 0 1 j8h 5 600 500 80 33.0 65t 28.0 7.1 1.1 b 1p - mm peak current a rated current arms inductance rating d.c.r. m o (max) winding mm fb lines-turns outside dimension d w mm p/n m h m h o [a] 1 2 * * (100khz) the coils of the lying type are also provided for all the items listed in the table above. for a coil of the type, symbol i sho uld be added to the end of the part number shown in the table (e.g. am05901jai). the coils of the pedestal attachment type are also provided for the items with symbol @ in the table above. for a coil of the type, symbol j should be added to the end of the part number shown in the table (e.g. am 05901jaj). the items preceded by symbol include two types, or the depth type with pedestal and the bed type with pedestal. to order th e item of the depth or bed type, add j or b at the end of the item of the item name respectively, as shown in the examples below:(am05122jbj for the depth type with pedestal) (am05901jab for the bed type with pedestal) *order the auxiliary pins separately if they are required for the pedestal. a d w (reference sample) l d : maximum outer diameter w : maximum width total lead length (l)* : 30mm (+3mm, -3mm) soldering boundary (a)* : 0mm (+4mm, -0mm) * the bottom of the core or coil ( )is defined as the base surface. the specification value of the soldering boundary a varies depending on the number of windings of the wire . ? major uses @ for harmonic counter-measure active filter. @ for normal mode line filter. ? features @ excellent d.c.current pre-loadability characteristics. @ reduction of core loss in comparison with the conventional cm-series coils, providing low temperature rises for uses at power of 100v or larger. @ excellent temperature stability. ? temperature dependence @ frequency : 100 khz, am choke ? inductance-frequency @ am choke
amorphous choke coil ? dc-current pre-loadability (1) @ core : c251510j3, c251515j2, c322015j2, frequency : 100 khz ? dc-current pre-loadability (2) @ core : c322020j2, c372320j2, c462720j2, frequency : 100 khz ? dc-current pre-loadability (4) @ core : c462725j2, c603525j2, frequency : 100 khz ? dc-current pre-loadability (3) @ core : c462720j2, c462725j2, frequency : 100 khz ? dc-current pre-loadability @ core : w462725j2, frequency : 100 khz ? major uses @ for harmonic counter-measure active filter. @ inverter output smoothing choke coil. ? features @ miniaturization in comparison with am series coils by about 30 percent. @ excellent d.c. superposition characteristics. a d w (reference sample) l d : maximum outer diameter w : maximum width total lead length (l)* : 30mm (+3mm, -3mm) soldering boundary (a)* : 0mm (+4mm, -0mm) * the bottom of the core or coil ( )is defined as the base surface. the specification value of the soldering boundary a varies depending on the number of windings of the wire . *1 the inductance at current 0 [a] indicates the reference value. *2 the number of turns indicates the reference value. the specification of the inductance takes precedence over that of the num ber of turns. the coils of the lying type are also provided for all the items listed in the table above. for a coil of the type, the final sy mbol h in the part number should be changed to i in the table (e.g. aw30101wki). the coils of the pedestal attachment type are also provided for the items with symbol @ in the table above. for a coil of the type, the final symbol h in the part number should be changed to j in the table (e.g. aw 30101wkj). mm peak current a rated current arms inductance rating d.c.r. m o (max) winding mm fb lines-turns outside dimension d w mm p/n m h m h o [a] 1 2 * * (100khz) 20 30 40 28.3 42.4 56.6 270 105 53 250 100 50 20 10 5 57.0 57.0 57.0 41.5 41.5 41.5 1.0x5p - 45t 1.3x4p - 28t 1.5x4p - 20t aw20251wkh aw30101wkh aw40500wkh ? general specification new!
|
